Light Gray Full-Flake Garage Floor in Ponte Vedra Beach

Garages near the beach take a beating. Salt air, sand tracked in from the car, summer humidity, and hot tires all wear on bare concrete. This one-car garage in Ponte Vedra Beach had a stained, tired slab and an old surface layer that had to come off before anything new could go down.

Prep comes first

Every floor we do starts with a full diamond grind. Grinding opens up the concrete so the coating locks into it instead of sitting on top, which is the main reason cheap kits peel. You can read more about why in our guide on diamond grinding vs. acid etching.

The coating system

After prep, our crew laid down:

• A 100% solids industrial epoxy base coat
• A full broadcast of Light Gray decorative flake, spread until no base coat shows through
• A scrape and vacuum to knock off loose chips
• A UV-stable polyaspartic topcoat that won't yellow in the Florida sun

We also carried the coating up the stem wall, so the edges look finished instead of stopping at a raw line of concrete. This is our color flake epoxy system, and it's the most popular choice for garages across Ponte Vedra Beach.

Why Light Gray works so well

Light Gray is one of the easiest blends to live with. It brightens a garage, hides dust and sand between cleanings, and pairs with almost any cabinet or wall color. If you're still deciding, our post on the best garage floor colors for Florida walks through the options.

Two days, start to finish

The whole job took two days on site. Most floors are ready for foot traffic quickly and back in use for cars within 1–2 days. Residential garage floors from JAX Epoxy Floors come with our lifetime warranty against peeling and chipping.

Get a free garage floor quote

Thinking about a floor like this in Ponte Vedra Beach, Nocatee, or anywhere around Jacksonville and St. Johns County? Request a free quote or call JAX Epoxy Floors at (904) 300-1558.