How to Maintain Your Epoxy Garage Floor

You've invested in a professional epoxy floor — now here's how to keep it looking new for years to come. The good news: epoxy floors are one of the lowest-maintenance flooring options available.

Regular Cleaning (Weekly)

1. Sweep or dust mop to remove dirt and debris. Grit is epoxy's worst enemy — it acts like sandpaper under foot and vehicle traffic.
2. Mop with warm water and a mild cleaner. Simple Green or a few drops of dish soap in a bucket works great.
3. Do NOT use vinegar, citrus cleaners, or harsh acids — they can dull the topcoat over time.

Dealing with Stains

• Oil/grease: Wipe up immediately with a paper towel, then clean with a degreaser
• Tire marks: Soft scrub brush with warm soapy water
• Rust stains: Bar Keeper's Friend (non-abrasive formula) works well
• Paint drips: If caught wet, wipe immediately. If dried, use a plastic scraper — never metal.

What to Avoid

• Rolling toolbox wheels without mats (creates wear lines over time)
• Jack stands without protective pads
• Dragging sharp metal objects across the surface
• Chemical solvents like acetone or brake cleaner (wipe up quickly if spilled)

Annual Maintenance

Once a year, consider a deep clean with an auto-scrubber or pressure washer set to low-medium pressure. Inspect for any chips or wear areas and touch up if needed.

When to Recoat

Even the best epoxy floor will eventually show wear. When the topcoat begins to thin (usually after 10-15 years in a residential garage), a fresh topcoat can be applied without stripping the entire floor. This costs a fraction of a new installation and extends the floor's life by another decade.

Questions about your existing floor? Contact us — we're happy to help.